Mirror Demisters

Finally there is a simple solution to those misted up mirrors in your bathroom.

With a simple to install mirror demister you no longer have to wait for the mist to clear before shaving, drying your hair or putting on make up.

Running costs are negligible - based on one hours use per day, an average demister will cost just 2-3 pence per week to run - a small price to pay for permanent mist free mirrors!

Mirror demister
Mirror Demister Pads

With a very simple 3 step installation, they are designed to be installed DIY, (Electrical connection will be required) 

  1. Ensure back of mirror is free of dust, grease or contaminates which may prevent the pad from adhering to the mirror correctly. Wipe clean and dry with a lint free cloth.

  2. Mark the position of where you want the pad to be fitted to your mirror with a pencil. It is advisable to draw round the mirror to ensure the guidelines are visible when you take the backing tape off.

  3. Peel the edge of the backing tape off the pad. Ensure heat pad is correctly aligned to the guide lines you marked, BEFORE you remove the backing tape. Carefully peel off backing tape.

Finally ask you Electrician to make the connection.

  • Grey Facebook Icon
  • Grey Twitter Icon
  • Grey Google+ Icon
  • Grey YouTube Icon

© 2019 by Handy Heat Ltd.

Unit 1 Fairway Court

Wigwam Lane


Nottingham NG15 7TA

0800 881 8097

GB 755 3117 37

Reg: 4173185