Installing Undertile/Stone Heating Cables/Mats

Cable mats are available in 150w per sqm for internal rooms & now 200w per sqm for conservatories & areas of high heat loss.

Under Tile Cable Kit 1. Make the electric povision as per instructions     2. Measure the room and mark out the cable spacing as detailed in the instructions   3. Layout out and tape down the cable     4. Test the cable     5. Fit the floor probe     6. Connect the thermostat     7. Tile over using flexible adhesive and grout     8. Wait at least one week before turning the heating on

Under Tile Cable Mat 1. Make the electrical provision as per instructions     2. Plan the start point and layout     3. Prime the sub-floor with the primer provided     4. Roll out the under tile mat, cutting the mesh turning when the opposite wall is reached     5. Fit the floor probe     6. Test the cable     7. Tile over using flexible adhesive and grout

Our Cable Mat laid onto Insulation Boards and tiles fitted on top

Cross section showing Tile Adhesive | Insulation | Primer | Cable Mat | Tile Adhesive | Tiles

Finally, although our instructions are very simple to follow, should you encounter any problems or have any questions along the way, we are always happy to help by phone or email. Of course one of the major benefits of buying direct from an underfloor heating specialist is that you can call on our many years of experience - a service not available from non-specialist suppliers!