The cable mat system is similar to the cable kit, except the heating cable is pre-woven to a mesh, with the cable already spaced out, for hassle free laying. The mesh on our cable mat is self adhesive, no need for taping, making it simple to lay.
The mat is simply rolled out, pressed to the floor, then tiled over suitable for both timber & concrete sub-floors - the mat system is ideal for larger, square or rectangular rooms where it can save time in spacing the cables.
Cable mats are available in 150w per sqm for internal rooms & now 200w per sqm for conservatories & areas of high heat loss
|
Every kit comes complete with:
- Heating cable supplied woven to a self adhesive mesh.
- Fully programmable thermostat controller with floor probe.
- Floor primer.
- Roller for primer.
- Simple installation instructions.
- Manufacturers Lifetime warranty.
|
|
 |
For simple rectangular rooms we have created a program that utilises Microsoft Excel to make selecting the right mat even easier . Please use the links below.
Click Here to Download the Program
Click Here to Download the Instructions
As a general guide, you should always chose a mat which is at least 10 % smaller than the free floor area to ensure it will fit.
e.g. 10.5sqm room - select 9sqm mat. If you require assistance chosing the correct mat, please call one of our sales advisors free on 0800 881 8097 or 0115 983 4255
|
|
