The use of insulated tile-backer boards will reduce warm-up times & reduce running costs in all cases, but they are especially recommended if installing under-tile heating on an un-insulated floor.
The boards can be fitted directly over floorboards, chipboard, plywood using galvanised screws & over existing concrete floors with ordinary floor tile adhesive (a rapid setting adhesive is recommended)
The boards are 0.72 sqm each & are available
in thicknesses of 6-60mm. The 10mm is by far the most popular
size for existing floors, however for new floors (especially
conservatories) the 50mm
is thse most popular thickness!
|
|
Handyheat holds one of the UK's largest
stock's
of Insulation Tilebacker Boards |