A typical floor construction using Inscreed Cable as Heating
In Screed Cable
In Screed Radiant Floor Heating Cables
The system is a primary heat source & can be used under almost any floor covering.
The output is varied by the cable spacing & usually ranges from 120-150w per sqm in a new build or extension, up to 200w per sqm in a conservatory, or where an 'off-peak' solution is required.
This cable is also ideal for use directly below thick stone & flagstone type flooring.
In-screed cables are a low cost solution & are designed to be used where regular constant heat is required. Where irregular heating is needed (e.g.
conservatory for ad-hoc use) we recommend the under-tile system with insulation boards (or an under wood/laminate carbon film system)
Supplied direct from our huge stocks.
Order before 2pm
for next day working day delivery
Advantages
High quality cable design.
Robust cable for Construction sites.
Low cost.
Ideal for permanent heating of screed floors.
Fixed direct to steel reinforcing or to your floor Insulation.
Also suitable for de-icing driveways.
Switched Contactor/Relay available on request, when covering large areas that require above 16amp.
Call 0800 881 8097 for advice.
The table below shows the range of cables available from stock. Price includes heating cable, digital thermostat with floor sensor, VAT & delivery
