Finally there is a simple solution to those misted up mirrors in your bathroom.
With a simple to install mirror demister you no longer have to wait for the mist to clear before shaving, drying your hair or putting on make up.
Running costs are negligible - based on one hours use per day, an average demister will cost just 2-3 pence per week to run - a small price to pay for permanent mist free mirrors!
Price List
Part No
Output Watts
Size in mm
RRP
On-Line Price
MH 7010
12 watts
274 x 252
£ 45.00
£ 34.26
MH 7020
28 watts
274 x 574
£ 58.00
£ 44.05
MH 7030
50 watts
519 x 524
£ 65.00
£ 50.90
MH 7035
80 watts
812 x 524
£ 66.00
£ 53.83
MH 7040
100 watts
1004 x 524
£ 79.00
£ 57.74
MH 7050
150 watts
1506 x 524
£ 90.00
£ 73.40
Simple 1,2,3 Installation
Step 1:
Ensure back of mirror is free of dust, grease or contaminates which may prevent the pad from adhering to the mirror correctly. Wipe clean and dry with a lint free cloth
Step 2 :
Mark the position of where you want the pad to be fitted to your mirror with a pencil. It is advisable to draw round the mirror to ensure the guidelines are visible when you take the backing tape off.
Step 3 :
Peel the edge of the backing tape off the pad. Ensure heat pad is correctly aligned to the guide lines you marked, BEFORE you remove the backing tape. Carefully peel off backing tape.
